Return to Overview

To specify the IPv4 address manually, follow the procedure below.
The default setting is <On>.

1. Press (Main Menu).

2. Press the right Any key to select <Additional Func.>.

3. Use [], [] or (Scroll Wheel) to select <System Management Set.>, then press [OK].

If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out).

4. Use [], [] or (Scroll Wheel) to select <Network Settings>, then press [OK].

5. Confirm that a screen shown left appears on the display, then press the right Any key to select <Done>.

6. Use [], [] or (Scroll Wheel) to select <TCP/IP Settings>, then press [OK].

7. Use [], [] or (Scroll Wheel) to select <IPv4 Settings>, then press [OK].

8. Use [], [] or (Scroll Wheel) to select <IP Address Settings>, then press [OK].

9. Use [], [] or (Scroll Wheel) to select <Manual Settings>, then press [OK].

10. Use - (numeric keys) to enter the IP address, then press [OK].

11. Use - (numeric keys) to enter the subnet mask address, then press [OK].

12. Use - (numeric keys) to enter the gateway address, then press [OK].

13. Press (Main Menu) to return to the Main Menu screen.

14. Restart the machine.

Turn OFF the machine and wait at least 10 seconds before turning it ON again.
Proceed to "Confirming IPv4 Address Settings."

• Back To Top