Scan > Scanning Documents to a File Server > Specifying Destinations (Scan to File Server) > Specifying a New Destination (Scan to File Server) > Specifying a Destination Using the Browse Key (Windows (SMB)) (Scan to File Server)
*
Specifying a Destination Using the Browse Key (Windows (SMB)) (Scan to File Server)

Return to Overview
  1. Press (Main Menu).
  1. Use [], [] or (Scroll Wheel) to select <Scan to Send> or <Scan to Store>, then press [OK].

If you select <Scan to Store>, use [], [] or (Scroll Wheel) to select <Store on File Server>, then press [OK].
  1. Use [], [] or (Scroll Wheel) to select <Enter File Server (New)>, then press [OK].
  1. Use [], [] or (Scroll Wheel) to select <Windows (SMB): Browse>, then press [OK].

<Windows (SMB): Browse>: Select this protocol if you want to specify a file server connected to a specific network.

  • After turning the main power ON, you must wait for the time set in Startup Time Settings to elapse before selecting <Windows (SMB): Browse>. Network transmission is not possible until this startup time has elapsed. (See "Setting Startup Time.")
  1. Use [], [] or (Scroll Wheel) to select the desired workgroup, then press [OK].
  1. Use [], [] or (Scroll Wheel) to select the desired file server, then press the right Any key to select <Set>.
  • If the <Network Password Entry> screen is displayed, enter your user name (up to 24 characters) and network password (up to 14 characters), then press the right Any key to select <Set>.
  1. Press the right Any key to select <Set>.

  • If you want to clear the specified destination:

  • 1. Press the left Any key to select <Confirm/Erase>.

  • 2. Check the destination you want to clear is selected, then press the left Any key to select <Erase>.

  • 3. Specify a destination again.

  • Back To Top