Scan > Scanning Documents to a File Server > Specifying Destinations (Scan to File Server) > Using the One-Touch (Scan to File Server)
*
Using the One-Touch (Scan to File Server)

Return to Overview

You can specify up to 200 destinations in one-touch.
Follow the procedure below to start a transmission and send a document using one-touch.

Remark
  • To use this feature, you must store group addresses in one-touch or Address Book beforehand. (See "Registering File Server Addresses in One-Touch.")
  • For details on how to scan the documents to a file server, see "Basic Methods for Scanning Documents to a File Server."
  1. Press (Main Menu).
  1. Use [], [] or (Scroll Wheel) to select <Send/FAX> or <Scan to Store>, then press [OK].

If you select <Scan to Store>, use [], [] or (Scroll Wheel) to select <Store on File Server>, then press [OK].
  1. Press the right Any key to select <One-touch>.
  1. Use [], [] or (Scroll Wheel) to select the desired destination, then press [OK].

You can select multiple destinations at a time.

  • To cancel a selected destination, select the destination again to clear the check mark.
  1. Press the right Any key to select <Set>.

  • If you want to clear the specified destination:

  • 1. Press the left Any key to select <Confirm/Erase>.

  • 2. Check the destination you want to clear is selected, then press the left Any key to select <Erase>.

If multiple destinations are specified, clear the other destinations as necessary.

  • 3. Specify a destination again.

  • Back To Top