Scan > Scanning Documents to a File Server > Adjusting Density (Scan to File Server) > Adjusting Base Color (Scan to File Server)
*
Adjusting Base Color (Scan to File Server)

Return to Overview

This mode enables you to erase the background color of the original when scanning. This mode is especially useful for scanning originals such as catalogs and paper, that have turned yellow from age.


Remark
  • For details on how to scan the documents to a file server, see "Basic Methods for Scanning Documents to a File Server."
  1. Press (Main Menu).
  1. Use [], [] or (Scroll Wheel) to select <Send/FAX> or <Scan to Store>, then press [OK].

If you select <Scan to Store>, use [], [] or (Scroll Wheel) to select <Store on File Server>, then press [OK].

  1. Specify a destination.
  • For details about how to specify destinations, see "Specifying Destinations (Scan to File Server)."
  1. Use [], [] or (Scroll Wheel) to display <Density/Background Rem. Set.>, then press [OK].
  1. Press the right Any key to select <Background>.
  1. Use [], [] or (Scroll Wheel) to select background setting, then press [OK].
  • <Off>: Does not erase the background color of the original.
  • <Background Removal>: If you want to erase the background color of the original, following step is not necessary.
  • <Background Fine Adjust.>: If you want to make fine adjustments to the density of the background color, go to the next step.
  1. Use [], [] or (Scroll Wheel) to select the desired color, then press [OK].
  1. Use [], [] or (Scroll Wheel) to adjust the strength of the color, then press [OK].

If you adjust the strength of <Yellow>, the levels of <Red> and <Green> adjust automatically to the same level as <Yellow>. If you adjust the strength of <Red> or <Green>, the <Yellow> level returns to its default level.

  1. Press the right Any key to select <Set>.

  • Back To Top