No paper is loaded in the paper cassette or multipurpose tray when copying or printing.
Load the paper correctly by inserting it all the way to the back of the paper cassette.
If the paper size is not appropriate for printing, <Change Paper Size> appears.
Set the appropriatesize paper for printing, and specify the correct size of paper in <Paper Settings>. For printing reports or lists, set the paper size to <LTR>, <LGL>, <STMT>, <EXEC>, <FLSC>, <OFI>, <B-OFI>, <M-OFI>, <G-LTRR>, <G-LGL> or <Custom Size>, and then load paper of the same size.
The appropriate paper for printing is not loaded.
After setting the appropriatesize paper for printing, specify the correct size of paper in the <Paper Settings> menu.
No response from the destination.
The server was not running when you tried to send.
Check the destination.
The network connection was lost when you tried to send. (Either you could not connect to the destination or the connection was lost before the job could complete.)
Check the status of the network.
A TCP/IP error occurred when you tried to send an e-mail or I-fax.
Check that the network cables and connectors are properly connected.
No response from the server. Check the settings.
The specified server settings are incorrect, or the server is not turned ON. Alternatively, the machine's TCP/IP resources may be low.
Wait for a while, and try browsing again. If you still fail, try selecting another server.
Not enough TCP/IP resources. Wait a moment and perform the operation again.
You cannot browse the network due to a lack of TCP/IP resources. This may be because documents have just been continuously sent or are being continuously sent through FTP or Windows (SMB).